InnoCal NIST-Traceable Calibration; Refractometer

Representative image only.
InnoCal Item # WZ-17105-00

£95.00GBP / Each
£114.00GBP (incl VAT)

SPECS & DESCRIPTION

Specifications & Description

  • Calibration TypeLiquid Testing
  • System Calibration (Instrument and Probe)Yes
  • Number Of Calibration Test Points2 points
  • Calibration Test PointsZero and near mid-point of scale
  • Calibration Test Range7.5 to 91.75 BRIX
  • DescriptionNIST-Traceable Calibration; Refractometer
NIST Traceable Calibration

More About this Item

Calibration reports issued by InnoCal may not be reproduced, except in full, without written permission of InnoCal. The results stated in our reports relate only to the items tested or calibrated. Measurements reported on our reports are traceable to SI units via national standards maintained by NIST and are performed in compliance with MIL-STD-45662A, ANSI/NCSL Z540-1-1994, 10CFR50, Appendix B, ISO9002-94, and ISO/IEC 17025:2005

ACCESSORIES

Add Optional Accessories

REVIEWS

REVIEW SNAPSHOT®

by PowerReviews
InnoCal NIST-Traceable Calibration; Refractometer
 
5.0

(based on 1 review)

Reviewed by 1 customer

Displaying review 1

Back to top

 
5.0

I would by this product again

By 

from Philadelphia, PA

About Me Academic/Professional Researcher

Verified Buyer

Pros

  • Accurate
  • Durable
  • Easy To Use
  • Well Calibrated
  • Works Properly

Cons

    Best Uses

    • In The Field

    Comments about InnoCal NIST-Traceable Calibration; Refractometer:

    Accuracy, durable, works properly

    Displaying review 1

    Back to top

    Q&A

    Do you have questions about this product?

    Get answers from real customers and in-house experts with AnswerBox.

    4 Questions | 5 Answers
    Displaying questions 1-4
    • Q:

      Hello, do you calibrate ABBE Refractometer III? Do you provide on-site calibration and what is the price?
      Asked on 7/14/2016 by Angela from BC , CA

      1 answer

      • STAFF EXPERT

        A:

        Yes, we can calibrate it, but it will have to be sent it. Please contact our Innocal team for more information.

        Answered on 8/25/2016 by Ethan from Technical Support
    • Q:

      Is the lab performing the calibration service ISO 17025 certified.
      Asked on 3/4/2011 by Anonymous

      1 answer

      • STAFF EXPERT

        A:

        Measurements reported on our reports are traceable to SI units via national standards maintained by NIST and are performed in compliance with MIL-STD-45662A, ANSI/NCSL Z540-1-1994, 10CFR50, Appendix B, ISO9002-94, and ISO/IEC 17025:2005.

        Answered on 3/4/2011 by Chris from Technical Support
    • Q:

      i have one Master T refractometer, can i send it to you for calibration?
      Asked on 11/15/2010 by Pedro Villa from Tijuana, Baja California

      1 answer

      • Staff Reviewer

        A:

        We will need more information. Please call and speak to our calibration department regarding what model and type of unit you have to see if we can calibrate it. Contact information may be found under the "Contact/About Us" tab.

        Answered on 11/17/2010 by Jen from Technical Support
    • Q:

      How often do the units need to be calibrated.
      Asked on 10/26/2009 by to cold up here for me.

      2 answers

      • STAFF EXPERT

        A:

        Calibration of a unit is generally determined by the company using it and the guidelines they are expected to follow. But, the general rule of thumb is once a year.

        Answered on 10/27/2009 by Jen from Technical Support
      • A:

        Calibration depends on your requirements. ISO 9001:2008 requires it to be calibrated yearly. But AIAG CQI9 standard requires quartly Calabration by an outside sourse and daily to a distiled water standard.
        I Hope this helps

        Answered on 12/9/2009 by MR Heat Treater from York SC
    Displaying questions 1-4

    Do you have a question about this product? 

    CUSTOMER SUPPORT

    Need Help with this product?

    Our specialists are here to help you find the best product or part available for your application. Call or Email us and we will make sure you get the right product or part for the job.

    Call Us At+44 (0)1480 272279
    Live chat