Process Connection1/16 to 3/16” (1.6 to 4.8 mm) hose barb
Unit Of Measurementpsi, mbar, bar, cm/H2O, "H2O, ft/H2O, mm/Hg, "Hg, kg/cm2, oz/inch2, kPa
Display3.5-digit LCD, 5/8" H digits
Battery Type1 9V (included)
HousingABS plastic
Media CompatibilityAir and clean gases
Resolution0.001 psi, 0.01" Hg
Height (in)8
Width (in)2 3/4
Length (in)1 3/4
DescriptionCalibrated Printing Digital Manometer; ±5 psi
Includes
pressure sensor, two 19"L sections of flexible tubing, hard-sided carrying case, roll of printer paper, one 9V battery, and NIST-traceable calibration certificate with data.
Key Features
Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
Record up to 12,000 readings
Connect tubing with 1/16 to 3/16” (1.6 to 4.8 mm) inner diameter
Obtain fast results—0.5 second response time!
Freeze the display with HOLD feature
Traceable® model number 3466
More About this Item
This digital manometer, vacuum/pressure gauge, can read and display 11 different units of measure. Obtain either gauge pressure/vacuum or differential pressure measurements. The backlit digital display, 5/8" H LCD, is easy to read—even from 6-ft away. Typical response time is 0.5 seconds.
Create hard copies of data—on the spot with the integrated printer. Printouts includes date and time stamp to meet strict conformity requirements. Store up to 12,000 recordings in the memory, freeze the display with the HOLD feature, and recall MIN/MAX readings.
Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.
Guaranteed to have at least one year of calibration remaining on certificate.
Our specialists are here to help you find the best product or part available for your application. Call or Email us and we will make sure you get the right product or part for the job.