gabled polycarbonate cover, sample shelf, and 6-ft (1.8-m) power cord.
StableTemp utility baths combine precise temperature control and excellent temperature stability to provide you with reliable heating. These baths feature dual thermostats — a primary microprocessor-based temperature controller that provides ±0.1°C precision, and a secondary over-temperature safety sensor prevents samples from overheating. For optimal temperature accuracy, the primary controller can be calibrated to your reference thermometer.
The stainless steel tank is seamless — no welds to leak or rust — and the rounded corners provide an easy-to-clean interior. Hinged polycarbonate lid allows condensation to flow back.
This water bath does have a drain port which is located on the rear of the unit. All you would need to do in order to drain fluid from the bath reservoir is place a suitable container beneath the drain port and remove the cap and o-ring.
You will require a circulator similar to the 01262-01.
This bath does not offer external circulation ports.
Yes, this unit has a built in timer for up to 99 hours.
Depending on the salt. The bath should not be used with chromates or chromium salts. At temperatures above 40°C, additives or mineral deposits can adhere to the heater. If deposits are allowed to build up, the heater may overheat and fail. Higher temperatures and higher concentrations of additives will hasten deposit build up.
Overall Dimensions (L x W x H) of the bath are 22.5" x 17.5" x 12". Working area of the bath (L x W x D) is 9.5" x 17" x 6".
Our specialists are here to help you find the best product or part available for your application. Call or Email us and we will make sure you get the right product or part for the job.